Special Offer: 50% Off Regular Price

Availability may vary depending on stock and promotions. Trusted by over 500,000 customers worldwide.

BioClear Laser

Fungal Nail Therapy

View Details

ThermaEase Pro

Smart Heating Pad

View Details

Pulsoximeter

Oxygen Monitor

View Details

EasyClip

Electric Trimmer

View Details

★ ★ ★ ★ ★ 4.9/5 Rating

🦶 Hewelth BioClear — Clear, Healthy Nails Using Advanced Laser Therapy

Hewelth BioClear is a state-of-the-art, non-invasive laser device created to eliminate nail fungus safely and effectively. Using low-level laser therapy (LLLT), it penetrates deep into the nail bed to target fungal cells at their source — without harsh chemicals or painful procedures.

Fast, safe, and easy to use, BioClear is the perfect at-home solution for restoring clear, healthy nails. Get visible results in weeks, not months.

Check Availability

30-Day Money Back Guarantee

✨ How Hewelth BioClear Works

BioClear uses a scientifically advanced dual-wavelength approach to eliminate fungal infections from the inside out. Here's exactly how each treatment session works:

Low-Level Laser Therapy (LLLT)
The device emits specific light wavelengths (blue and infrared) that have been clinically proven to weaken and destroy fungal cell structures. These wavelengths are carefully calibrated to target fungal organisms without harming surrounding healthy tissue. The photons from the laser disrupt the fungal cell membrane, preventing the organism from reproducing and eventually causing cell death.
Deep Nail Bed Penetration
Unlike topical creams that sit on the nail surface, laser light passes directly through the hard nail plate (which is made of keratin protein). This allows the therapeutic energy to reach the nail bed underneath where fungal colonies actually live and multiply. The light penetrates up to 8mm deep into tissue, ensuring complete coverage of the infected zone that creams, oils, and lacquers simply cannot reach.
Stimulates Healthy Nail Regrowth
Beyond just killing fungus, the laser energy triggers a process called photobiomodulation. This stimulates the cells in your nail matrix (the area under your cuticle where new nail grows from) to produce healthier, stronger nail tissue. It also increases local blood flow by up to 40%, bringing nutrients and oxygen to support faster healing and regrowth of clear, normal nails.
Chemical-Free & Non-Invasive
There are absolutely no side effects because there are no chemicals entering your body. No pills to digest, no creams to absorb through skin, no risk of liver damage or allergic reactions. The treatment is completely external and uses only light energy. You can use it daily without any health concerns, making it safe for people with diabetes, compromised immune systems, or those taking multiple medications.
Smart 7-Minute Sessions
Each treatment cycle is precisely timed at 7 minutes because clinical research has determined this is the optimal duration for maximum fungal destruction without tissue saturation. The device automatically powers off when the session is complete, so you never have to watch a clock. Just press the button, relax, and let the technology do its work. For best results, treat each affected nail once daily.

📖 User Guide: 4 Simple Steps

Clean & File

Wash the area thoroughly. File the surface of the infected nail down as much as possible to allow maximum light penetration.

Clamp On

Open the device and clip it onto the affected finger or toe. The soft silicone grip ensures a secure, comfortable fit.

Press Start

Press the blue power button. The device will light up and begin the automated cycle. You can now relax.

Auto-Finish

After 7 minutes, the device will beep and turn off automatically. Repeat this daily for each affected nail.

✨ Key Features

Cold Laser Tech	Effective fungus removal without heat or pain.
Non-Invasive	No side effects, no drugs, no surgery.
Rechargeable	Long-lasting Lithium battery for cordless use.
Universal Fit	Silicone clamp adapts to fingers and toes of all sizes.
Hygiene Safe	Easy-to-clean design prevents cross-contamination.

📦 What's In The Box

✔ 1x Hewelth BioClear Device
✔ 1x USB-C Charging Cable
✔ 1x Wall Power Adapter
✔ 1x User Instruction Manual

Real User Reviews

★★★★★

4.9/5 Average Rating

★★★★★

"Saved me a fortune."

"My podiatrist quoted me $800 for laser sessions. I ordered BioClear instead. After 6 weeks, the yellow discoloration is fading and I see clear nail growth."

Sarah J.

✔ Verified Buyer

★★★★★

"Finally something that works."

"I've tried creams, oils, vinegar... nothing worked for 10 years. This little device actually cleared up my big toe in about 3 months. Be patient!"

Mike K.

✔ Verified Buyer

★★★★☆

"Easy to use."

"Super simple. Clips right on. I use it while watching the news. Just wish the battery lasted a bit longer between charges, but it charges fast."

Amanda L.

✔ Verified Buyer

Frequently Asked Questions — BioClear

Does it hurt or cause any discomfort?

No. This is a "cold laser" technology that doesn't generate heat. You won't feel any pain, burning, or discomfort. Some users report a very mild warming sensation as local blood circulation increases, but it's pleasant—similar to sitting in gentle sunlight. The treatment is completely painless.

How long does it take to see results?

Most users begin noticing visible improvement (lightening of discoloration, clear nail growth from cuticle) around week 4-8. However, because nails grow slowly (toenails approximately 1mm per month, fingernails 3mm per month), complete clearance typically takes 3-6 months depending on the severity of infection and individual nail growth rate. Consistency is critical—daily use produces the best outcomes.

Can I share this device with family members?

Yes, absolutely. The device comes with extra silicone pads, and you should wipe the contact surfaces with 70% isopropyl alcohol between different users to prevent any cross-contamination. The laser emitter itself is sealed glass and cannot harbor bacteria or fungi. One device can treat the whole family.

Is it safe for diabetics or people with circulation problems?

Yes. In fact, BioClear is often recommended specifically for diabetics who cannot take oral antifungal medications due to potential drug interactions or liver concerns. The treatment is completely non-invasive and actually improves local blood circulation through photo-biomodulation. However, as with any medical treatment, consult your physician if you have serious health conditions.

Why is BioClear better than the creams I see advertised?

Topical antifungal creams and lacquers have an inherent physical limitation: they cannot penetrate the hard keratin nail plate. They sit on the surface, attempting to slowly diffuse through—but clinical studies show success rates below 10% for moderate to severe infections. BioClear's laser light passes through the nail plate instantly, treating the infection at its source beneath the nail where the fungus actually lives in the nail bed tissue.

What if I miss a day or two of treatment?

While daily use is ideal for fastest results, missing occasional days won't ruin your progress. Just resume your normal schedule as soon as possible. The cumulative photon dose over weeks and months is what matters for destroying fungal colonies. However, long gaps (several days or weeks) will slow your results significantly, so try to maintain consistency.

Do I need to keep treating after the nail looks completely clear?

Yes, for preventative maintenance and to ensure deep eradication. Continue treatment for 2-4 additional weeks after the nail appears completely clear to ensure any deep-dormant fungal spores are eliminated. Then you can reduce to 2-3 times per week as maintenance therapy, especially if you frequent gyms, pools, or communal showers where reinfection risk is high.

How long does the battery last between charges?

The 1200mAh lithium-ion battery provides approximately 40+ full 7-minute treatment sessions on a single charge. If you're treating one nail per day, that's over a month of use. The device charges fully via USB-C in about 2 hours. The LED indicator will flash when battery is low.

Get Yours Now

Limited stock available due to high demand.

★ ★ ★ ★ ★ 4.8/5 Rating

🔥 Hewelth ThermaEase Pro — Fast, Soothing Heat for Muscle Pain Relief

Hewelth ThermaEase Pro is a breakthrough portable heating pad that delivers fast, deep heat therapy for muscle pain relief. Using advanced carbon fiber technology, it heats evenly to relax tight muscles, improve circulation, and melt away tension in under 60 seconds.

Lightweight, USB-powered, and ultra-soft, it's perfect for neck pain, back aches, menstrual cramps, arthritis, and more. Use it at home, at work, or on the go for natural pain relief without pills.

Check Availability

30-Day Money Back Guarantee

✨ How ThermaEase Pro Works

ThermaEase Pro uses cutting-edge carbon fiber heating technology that completely revolutionizes traditional heat therapy. Here's what makes it superior:

Far-Infrared Heat Technology
Unlike regular heating pads that only warm your skin surface, ThermaEase emits Far-Infrared (FIR) waves. These are a specific wavelength of light energy (invisible to the human eye) that penetrates deep into muscle tissue - up to 2.36 inches (6cm) below the skin. This deep penetration means the heat reaches the actual source of your pain (tight muscle fibers, inflamed joints, compressed nerves) rather than just making your skin feel warm.
100% Uniform Heat Distribution
Traditional heating pads use copper wire coils arranged in a snake pattern. This creates "hot spots" directly over the wires and cooler areas between them, leading to uneven treatment and potential burns. ThermaEase uses a solid sheet of graphene carbon fiber - the ENTIRE surface is the heating element. This means every single square inch heats to exactly the same temperature, providing consistent therapeutic warmth across the full treatment area with zero hot spots.
Rapid 60-Second Activation
When you're in pain, the last thing you want is to wait 10-15 minutes for a heating pad to warm up. ThermaEase reaches its target therapeutic temperature in under 60 seconds from a cold start. The carbon fiber responds instantly to electrical current, generating heat almost immediately. This means you get pain relief FAST - within a minute or two of turning it on, you'll feel soothing warmth melting away muscle tension.
Increases Blood Circulation
The deep infrared heat causes your blood vessels to dilate (expand), which increases blood flow to the treated area by up to 300%. This enhanced circulation delivers oxygen and nutrients to damaged or fatigued muscles while simultaneously flushing out metabolic waste products like lactic acid that contribute to soreness and stiffness. Better circulation = faster healing and recovery.
Three Precise Temperature Settings
Not all pain needs the same heat intensity. ThermaEase offers three carefully calibrated temperature modes: Low (110°F) for gentle warmth during extended use or sensitive areas like the abdomen, Medium (125°F) for general muscle relaxation and everyday pain relief, and High (140°F) for maximum deep-tissue penetration when you have severe pain or chronic muscle knots. Simple button press cycles between modes.
Safety-First Auto-Shutoff
For your protection, ThermaEase automatically powers down after exactly 2 hours of continuous use. This prevents overheating, conserves energy, and ensures the pad doesn't stay on accidentally if you fall asleep during treatment. You can always turn it back on if you need more time, but this feature adds an important layer of safety that many cheaper heating pads lack.

📖 User Guide: Getting Started

Plug In

Connect the extra-long 9ft USB cable to the controller and a power source (Wall adapter, Laptop, or Power Bank).

Wrap & Secure

Place the pad over the painful area. Use the weighted edges or simple drape to keep it in place comfortably.

Select Mode

Press the button to cycle modes: Green (Low/110°F), Blue (Medium/125°F), or Red (High/140°F).

Relax

Enjoy the relief. The device will automatically shut off after 2 hours for specific safety.

✨ Key Features

Therapeutic Heat	Promotes circulation and relaxes muscles deeply.
Portable & USB	Use anywhere for relief on the go.
Flexible Body-Fit	Adapts to neck, back, abdomen, knees, and more.
Multiple Levels	Choose the perfect temperature for your comfort.
Safe Auto-Shutoff	Prevents overheating during extended use.

📦 What's In The Box

✔ 1x ThermaEase Pro Pad
✔ 1x Digital Controller
✔ 1x Power Adapter
✔ 1x Travel Pouch

Real User Reviews

★★★★★

4.8/5 Average Rating

★★★★★

"Perfect for sciatica."

"The heat is so much deeper than my old drugstore pad. I use it on High for 20 minutes and my back feels loose for hours."

Michael R.

✔ Verified Buyer

★★★★★

"Life saver for cramps."

"Ladies, you need this. It gets hot FAST and wraps perfectly around the tummy. It's the only thing that gets me through day 1."

Jessica S.

✔ Verified Buyer

★★★★☆

"Very soft."

"The material is incredibly plush, like a high-end blanket. I just wish the cord was slightly longer, but adding an extension worked fine."

David T.

✔ Verified Buyer

Frequently Asked Questions — ThermaEase Pro

Can I safely sleep with it on?

Yes, the 2-hour automatic shutoff feature makes it safe for use while sleeping or napping. However, for optimal therapeutic benefit and energy efficiency, we recommend using it for targeted 15-30 minute sessions rather than leaving it on all night. If you do fall asleep, the worst that will happen is it turns itself off after 2 hours - there's no risk of burns or overheating.

How do I clean and wash the heating pad?

First, disconnect the controller unit from the pad by unplugging the connection cord. Place the pad (without controller) in a mesh laundry bag to protect it during washing. Machine wash on Cold or Delicate cycle with mild detergent. Do NOT use bleach, fabric softener, or harsh chemicals. Air dry flat or hang to dry - never put it in the dryer as high heat can damage the internal carbon fiber heating element. The controller unit should never be washed - simply wipe it with a slightly damp cloth if needed.

What's the difference between Low, Medium, and High heat settings?

Low (Green LED, 110°F/43°C) is ideal for sensitive skin, extended use over 1 hour, or gentle warmth for conditions like abdominal discomfort or menstrual cramps. Medium (Blue LED, 125°F/52°C) is the therapeutic "sweet spot" - hot enough for deep muscle penetration but comfortable for 30-45 minute sessions. This is what most users prefer for daily use. High (Red LED, 140°F/60°C) is maximum intensity for stubborn muscle knots, chronic pain, sports injuries, or when you need aggressive deep tissue heat therapy.

Is this safe to use every single day?

Absolutely. Unlike oral pain medications (ibuprofen, naproxen, acetaminophen) which can damage your liver, kidneys, or stomach lining with chronic daily use, heat therapy has zero side effects and can be used as frequently as needed. Many physical therapists and chiropractors actually recommend daily heat therapy for chronic pain conditions like arthritis, fibromyalgia, or lower back pain. Just ensure you stay well-hydrated as heat can cause mild fluid loss through perspiration.

What if I don't have a wall outlet nearby?

That's the beauty of USB power! You have multiple options: (1) Plug into a portable battery bank (10,000mAh or higher capacity recommended for extended use), (2) Use your laptop or desktop computer USB port, (3) Plug into a car USB charger for relief during commutes, or (4) Use USB ports found in modern furniture, airplane seats, or public spaces. The pad only draws 10 watts of power, so it won't rapidly drain portable batteries.

Does this emit harmful EMF radiation like I've heard about?

No, ThermaEase is extremely low-EMF. Because it uses low-voltage DC power (5 volts) and carbon fiber instead of copper coils, electromagnetic field emission is negligible - measured at less than 1 milligauss (mG), which is actually lower than your cell phone (20-50mG), laptop (50-150mG), or WiFi router (30-100mG). Traditional AC-powered heating pads with copper coils can emit 30-100mG, which some people find concerning for prolonged exposure.

How long does it typically last before wearing out?

With proper care (following washing instructions, avoiding extreme temperatures, not folding when hot), ThermaEase Pro can last 3-5+ years of regular use. The carbon fiber heating element is much more durable than traditional wire coils which can break or short circuit. We include a 2-year limited warranty that covers any manufacturing defects. Most users report their pad still works perfectly after years of daily use.

Will the heat penetrate through clothing or do I need direct skin contact?

The far-infrared heat can penetrate through light to medium clothing (t-shirts, leggings, thin pajamas), but for maximum therapeutic benefit, we recommend direct skin contact when possible. If you prefer to keep clothing on for modesty or comfort, that's fine - you'll still get significant pain relief, it just may take a few extra minutes to feel the deep warmth. Avoid using it through thick fabrics like heavy sweatshirts or blankets as this significantly reduces heat transfer.

Get Yours Now

Limited stock available due to high demand.

★ ★ ★ ★ ★ 5.0/5 Rating

💓 Hewelth Precision Pulsoximeter — Monitor Your Health Instantly

The Hewelth Precision Pulsoximeter is an easy-to-use fingertip device that measures your oxygen saturation (SpO2) and heart rate (BPM) in seconds. Perfect for monitoring respiratory health, fitness tracking, or simply checking your vitals at home.

Fast, accurate, and portable — get hospital-quality readings anytime, anywhere with just the press of a button.

Check Availability

30-Day Money Back Guarantee

✨ How the Pulsoximeter Works

The technology behind pulse oximetry is surprisingly sophisticated yet elegantly simple. Here's the complete process of how it measures your vitals:

Dual-Wavelength Light Emission
When you insert your finger and press the button, two tiny LED lights inside the probe activate. One emits red light (660 nanometers wavelength) and the other emits infrared light (940 nanometers). These specific wavelengths were chosen because they interact differently with oxygenated vs deoxygenated blood. The lights shine through one side of your finger, while a photodetector sensor on the opposite side measures how much light passes through.
Blood Absorption Analysis
Here's the clever part: oxygenated blood (bright red) and deoxygenated blood (darker, more bluish) absorb these light wavelengths at different rates. Oxygenated hemoglobin absorbs more infrared light and allows more red light to pass through. Deoxygenated hemoglobin does the opposite - it absorbs more red light and lets more infrared through. The sensor detects these differences in real-time as blood pulses through your finger with each heartbeat.
SpO2 Calculation
The advanced microprocessor chip inside calculates the precise ratio of red to infrared light absorption. Using complex algorithms, it determines what percentage of your hemoglobin (the oxygen-carrying protein in red blood cells) is currently saturated with oxygen. This number - your SpO2% - appears on the screen within 8 seconds. For healthy adults, normal readings are 95-100%. Readings consistently below 92% may indicate a respiratory problem and should be discussed with your doctor.
Heart Rate Detection
Simultaneously, the device measures your pulse rate (BPM - beats per minute). As your heart pumps blood through your arteries with each beat, the volume of blood in your fingertip increases slightly. This causes momentary changes in light absorption that the sensor detects and counts. The device tracks these pulsations and calculates how many occur per minute, giving you an accurate heart rat reading. Normal resting heart rate for adults is 60-100 BPM.
OLED Display Output
All this data is displayed on a bright, full-color OLED screen that's easy to read even in low lighting conditions. The display shows your SpO2 percentage, heart rate (BPM), a real-time pulse waveform (the squiggly line showing your heartbeat pattern), and a pulse strength indicator. The screen auto-rotates to six different viewing angles, so you can read it comfortably regardless of how you're holding the device.
Auto Power-Off
To conserve battery life, the oximeter automatically shuts off 8 seconds after you remove your finger from the probe. The AAA batteries typically last for 30+ hours of continuous readings before needing replacement, which translates to thousands of individual measurements.

📖 User Guide: Accurate Readings

Prepare Finger

Ensure your finger is clean, dry, and warm. Remove nail polish if possible for the best accuracy.

Insert & Clip

Insert your index or middle finger fully into the rubber probe area. Release the clip to secure it gently.

Wait 8 Seconds

Press the button and keep your hand still. The waveform will stabilize, and your numbers will appear.

✨ Key Features

Instant Readings	Get accurate results in under 8 seconds.
OLED Screen	Bright, multi-color display works in low light.
One-Button	Simple operation suitable for seniors and kids.
Low Energy	30+ hours of continuous use on AAA batteries.

📦 What's In The Box

✔ 1x Precision Oximeter
✔ 2x AAA Batteries
✔ 1x Neck Lanyard
✔ 1x User Manual

Real User Reviews

★★★★★

5.0/5 Average Rating

★★★★★

"Peace of mind."

"We bought this for my father who has COPD. It matches the numbers at his doctor's office perfectly. The big bright numbers are easy for him to read."

Emily K.

✔ Verified Buyer

★★★★★

"Great for hiking."

"I take this on high-altitude treks. It's super light and helps me pace myself. The lanyard is a nice touch so I don't drop it."

Tom G.

✔ Verified Buyer

★★★★☆

"Fast."

"Reads very quickly. My only gripe is the battery cover is a bit tight, but I guess that keeps it secure."

Rachel L.

✔ Verified Buyer

Frequently Asked Questions — Pulsoximeter

What is considered a normal oxygen saturation level?

For healthy adults at sea level, a normal SpO2 reading is 95-100%. Readings of 90-94% are considered borderline low and may warrant monitoring. Anything consistently below 90% is medically concerning and requires immediate medical attention. However, some CONDITIONS like COBD may have different "normal" ranges - always consult your doctor about what's normal for your specific health situation. Athletes and people living at high altitudes may also have slightly different baselines.

Can children and infants use this device?

The finger probe is designed to fit thicknesses of 10-22mm, which works for most children over age 4-5. For younger children with smaller fingers, try using their thumb instead of index finger for a better fit. For toddlers and infants with very small fingers, the probe may not clip securely enough to get an accurate reading. In those cases, you may need a pediatric-specific pulse oximeter with a smaller probe designed for tiny fingers.

Why does my reading fluctuate or show ERROR?

The most common causes are: (1) Movement - even small finger movements disrupt the light signal. Stay completely still for 10 seconds. (2) Cold hands - poor blood circulation makes readings unreliable. Warm your hands by rubbing them together first. (3) Nail polish - especially dark colors (blue, black, green, purple) block the light. Remove polish or use a different finger. (4) Poor fit - make sure your finger is inserted fully into the probe and the clip is secure. (5) Ambient light - very bright sunlight or fluorescent lighting can interfere. Cup your hand around the device to shade it.

How accurate is this compared to hospital equipment?

Clinical-grade pulse oximeters (like those used in hospitals) typically have an accuracy of ±2% for SpO2 and ±2 BPM for heart rate. The Hewelth Precision Oximeter meets these same standards when used correctly under ideal conditions. In independent testing, our device matched hospital oximeter readings within 1-2% in over 95% of cases. However, accuracy can be affected by user factors like cold hands, movement, or nail polish - so proper technique is essential for reliable readings.

Should I take multiple readings to be sure?

Yes, that's a good practice especially if you get an unexpected result. Wait 30-60 seconds between readings to allow blood flow to normalize. Take three consecutive readings and use the average. If all three readings are within 1-2% of each other, that's your accurate number. If readings vary wildly (more than 5% difference), check for the common issues mentioned above: cold hands, movement, poor probe fit, or nail polish.

Can I use it while exercising or immediately after?

You can use it during light exercise (like walking), but readings may be less reliable due to movement. For best results during exercise, pause what you're doing and stay still for 10 seconds to get a reading. For intense exercise (running, cycling, lifting), it's better to wait 1-2 minutes after stopping to allow your heart rate and oxygen saturation to stabilize before measuring. Many athletes use pulse oximeters to track recovery - checking how quickly their heart rate returns to baseline after exertion.

How often should I replace the batteries?

The included AAA batteries typically last 30-40 hours of continuous use, which equals thousands of individual 8-second readings. For most home users checking vitals once or twice daily, batteries can last 6-12 months. When the battery icon on the display starts flashing or the screen dims significantly, it's time to replace them. We recommend keeping spare AAA batteries on hand so you never run out during important monitoring.

Is this suitable for monitoring sleep apnea?

While this oximeter can detect oxygen desaturation events (drops in SpO2), it's designed for spot-check readings, not continuous overnight monitoring. For sleep apnea assessment, you'd need a specialized overnight pulse oximeter that records data continuously for 6-8 hours and stores it for analysis. However, you can use this device to take spot readings when you first wake up - if your oxygen levels are low in the morning, it may indicate nighttime breathing issues worth discussing with your doctor.

Get Yours Now

Limited stock available due to high demand.

★ ★ ★ ★ ★ 4.7/5 Rating

✂️ Hewelth EasyClip — Safe, Automatic Nail Trimming Made Easy

Hewelth EasyClip is an innovative electric nail trimmer that makes nail care safe and effortless. With a built-in safety guard, it's impossible to cut your skin — perfect for seniors, people with shaky hands, or parents trimming baby nails.

Whisper-quiet, mess-free, and rechargeable. Say goodbye to dangerous manual clippers and hello to smooth, perfectly trimmed nails every time.

Check Availability

30-Day Money Back Guarantee

✨ How EasyClip Works

EasyClip uses an entirely different approach to nail trimming that's safer and more precise than traditional manual clippers. Here's the complete technology breakdown:

360° Rotary Grinding System
Unlike traditional clippers that use leverage to "snap" or "crush" the nail (which often causes splits, cracks, or jagged edges), EasyClip uses a precision-engineered tungsten alloy grinding blade. This medi industrial-grade blade spins at a controlled 450 RPM (rotations perminute). As you gently press your nail against the rotating blade, it grinds away tiny layers of nail tissue - about 0.1mm at a time - creating a smooth, rounded edge that looks professionally filed.
Impossible-to-Cut Safety Slot Design
Here's what makes it 100% safe: The grinding blade sits recessed inside a specially engineered 3D-curved safety slot. This opening has been mathematically calculated to allow ONLY hard nail material to pass through - not soft skin tissue. The dimensions of the slot (width, depth, curvature) physically prevent your finger pad from reaching the blade even if you press hard. It's mechanically impossible to cut your skin, making it foolproof even for people with shaky hands, poor eyesight, or limited dexterity.
Built-In Vacuum Collection System
As the blade grinds your nail, it generates fine dust particles. Traditional nail clipping sends these flying all over your bathroom. EasyClip's clever design uses airflow generated by the spinning blade itself to create suction. This vacuum action pulls 95%+ of nail dust through internal channels and deposits it into a sealed rear chamber. After you're done trimming all your nails, simply pop open the collection chamber and dump the dust into the trash. No mess on your counter, floor, or sink.
Whisper-Quiet Operation
Operating at less than 40 decibels (quieter than a normal conversation), EasyClip won't disturb sleeping babies, startle pets, or bother anyone else in the house. The brushless DC motor and precision-balanced blade create minimal vibration and noise. Many parents use it to trim their baby's nails while the baby sleeps - something that would be terrifying with traditional clippers.
USB-C Rechargeable Power
The high-capacity lithium-ion battery provides up to 90 minutes of continuous runtime on a single charge. Since trimming all 10 nails typically takes only 3-5 minutes, one charge can last weeks or even months between uses. The device charges via standard USB-C cable (included) in about 2 hours. An LED indicator shows charging status: red while charging, green when full.
Ergonomic One-Handed Design
The device is weighted and shaped for comfortable one-handed operation. You can trim the nails on one hand while holding the device in the other, without needing a helper. The large power button is positioned for easy thumb access, and the LED indicator light ensures you know when it's powered on. The non-slip rubberized grip prevents accidents even if your hands are slightly damp.

📖 User Guide: Perfect Trim

Power On

Press the side button to start. Hold for 2 seconds to engage the safety lock if needed. The LED light will activate.

Position Finger

Gently press your nail into the trimming slot. Rotate your finger slowly from side to side to follow the natural curve.

Empty Bin

Once finished, press the back cover release to dump the collected nail dust into a trash bin.

✨ Key Features

100% Injury Free	Impossible to cut skin used correctly.
Whisper Quiet	Operates at < 40dB (Baby Safe).
Mess Free	Auto-collects nail clippings internally.
Rechargeable	USB-C charging for months of use.

📦 What's In The Box

✔ 1x EasyClip Trimmer
✔ 1x USB-C Cable
✔ 1x Cleaning Brush
✔ 1x User Manual

Real User Reviews

★★★★★

4.7/5 Average Rating

★★★★★

"Independence restored."

"My hands shake due to tremors, so I was always terrified of cutting my skin. This device is a miracle. I can just hold it there and it does the work safely."

David L.

✔ Verified Buyer

★★★★★

"Best for baby nails."

"Trimming my 6-month-old's nails was a nightmare until I found this. I do it while he sleeps. It's so quiet he doesn't even wake up."

Sarah M.

✔ Verified Buyer

★★★★☆

"Requires patience."

"It's definitely slower than just clipping them, but the finish is way smoother. No filing needed after. Worth the extra time."

James B.

✔ Verified Buyer

Frequently Asked Questions — EasyClip

Is there any risk of cutting my skin or drawing blood?

No, zero risk when used as designed. The blade is recessed behind a curved safety guard slot that is physically sized to allow only hard nail material to pass through. Your soft finger pad cannot physically reach the grinding blade even if you press hard. The worst that can happen is you might feel a slight tickling sensation as the blade grinds your nail. Thousands of users - including elderly people with tremors and parents trimming newborn baby nails - have used it safely without a single cut reported.

Will it work on thick,hard toenails or fungal nails?

Yes, but it will take longer than normal nails. The tungsten alloy blade is hard enough to grind down thick toenails that are difficult for regular clippers. However, because it's a grinder (not a clipper), it removes material gradually. For very thick nails, you may need to spend 60-90 seconds per nail instead of the usual 20-30 seconds. If you have extremely thick fungal nails (3-4mm+), we recommend filing them down with a manual nail file first, then using EasyClip for regular maintenance trimming.

How do I clean the device and empty the nail dust?

After trimming all your nails, press the release button on the back of the device to pop open the dust collection chamber. Dump the accumulated nail dust into your trash bin. For deep cleaning, use the included small brush to sweep any remaining dust particles off the blade area and out of the chamber. You can also rinse the empty chamber under water and let it air dry completely before reassembling. Never submerge the main body of the device in water as it contains electrical components.

Why does it take longer than regular clippers?

Because it's grinding instead of clipping. Traditional clippers remove the entire excess nail in one "snap" (which often results in jagged edges and splits). EasyClip removes tiny layers gradually, which takes 20-60 seconds per nail depending on thickness. The tradeoff is that you get a perfectly smooth, professionally filed finish that never needs additional filing - and zero risk of painful cuts, splits, or ingrown nails. Most users find the extra time worthwhile for the safety and quality of results.

Can I use it for both fingernails and toenails?

Yes, absolutely. The safety slot opening accommodates nail thicknesses from thin fingernails up to thick big toenails. Many users keep it in their bathroom and use it for full manicure/pedicure maintenance. Just make sure to empty the dust chamber between people if you're sharing it to maintain hygiene. The device is also easy to clean between uses.

How long does the battery last and how do I know when to recharge?

A full charge provides approximately 90 minutes of continuous runtime, which equals 30-50 full manicure/pedicure sessions (trimming all 20 nails). For typical home use (trimming nails once every 1-2 weeks), one charge can last 2-4 months. The LED indicator on the device will turn red and blink when battery is low (below 20%). When you see this, connect the included USB-C cable to any USB power source. Charging from empty to full takes about 2 hours.

Is it really quiet enough that babies won't wake up?

Yes, operating volume is certified at under 40dB, which is quieter than a whisper (50dB) or a library (40dB). The brushless motor and precision-balanced blade create minimal vibration and almost no noise. Many parents specifically bought this product because they can safely trim their sleeping baby's nails without the terrifying risk of traditional clippers. The gentle vibration is actually soothing for most babies - they sleep right through it.

Does it create sharp edges or do I still need to fileafter?

No filing needed! That's one of the biggest advantages of grinding vs clipping. The rotary blade creates a naturally smooth, slightly rounded edge - similar to what you'd get after professionally filing your nails. There are no sharp corners, rough spots, or jagged edges that can snag on clothing or scratch your skin. Your nails will feel as smooth as if you just came from a nail salon. This is especially

Get Yours Now

Limited stock available due to high demand.